Metal speciation measurement by diffusive gradients in thin films technique with different binding phases

Since its invention in the mid-1990s, the diffusive gradients in thin films (DGT) technique has rapidly become one of the most promising in situ sampling techniques for trace metal measurement in natural waters. We investigated here the possibility of using DGT devices with different binding phases to determine different DGT labile fractions of Cd and Cu in laboratory solutions and in natural waters. Several binding phases were studied, including conventional Chelex 100 resin imbedded polyacrylamide hydrogel (Chelex) and several recently developed binding phases, poly(acrylamide-co-acrylic acid) (PAM-PAA) gel, poly(acrylamidoglycolic acid-co-acrylamide) (PAAG-PAM) gel, Whatman P81 cellulose phosphate ion-exchange membrane (P81), and poly(4-styrenesulfonate) (PSS) aqueous solution. Laboratory testing in metal solutions spiked with EDTA or humic acid suggested that all the DGT devices measured only free metal ions and inorganic metal complexes. Upon field testing at both freshwater and seawater sites it was found that the DGT labile metal concentrations measured by different binding phases can be significantly different, suggesting that the DGT labile metal fractions were dependent on binding strength of the binding phase. By designing binding phases that can compete with different natural water complexing ligands to varying extents, it is possible to use these different DGT devices to measure metal speciation in natural waters.     

Vibronic fine structure in the absorption spectrum of oligothiophene thin films

A multimode Holstein Hamiltonian is used to describe optical excitations in quaterthiophene pinwheel aggregates. The Hamiltonian includes the coupling of excitons originating from the 1A(g)-->1B(u) electronic transition to phonons originating from the five intramolecular vibrational modes known from oligothiophene solution absorption/emission spectroscopy. The resulting eigenstates with lowest energy are best described as hybrid polaron phonons. The polarons are formed by coupling excitons with the higher frequency (688, 1235, and 1551 cm(-1)) vibrational modes, while the (optical) phonons arise from the lower frequency (161 and 333 cm(-1)) modes. The polaron phonons are responsible for the fine structure defining the A(1) band in the low-energy region of the absorption spectrum, ranging from the band origin to approximately 1500 cm(-1) beyond. The calculated A(1) band of quaterthiophene aggregates agrees favorably with that observed from thin films.     

Structural studies of DMβCD/dihalogenated norcarane inclusion complexes

Inclusion complexes of 7,7-dibromonorcarane (1) and 7,7-dichloronorcarane (2) with 2,6-dimethyl--cyclodextrin (DMCD) have been synthesized. Their structures have been studied by chemical analysis, thermal behavior, IR spectra, UV absorptions and¹³C NMR spectra in DMSO solutions. The studies show that the orientation of (1) is different from that of (2) in the DMCD cavity.Presented at the 6th International Symposium on Molecular Recognition and Inclusion, Berlin, Germany, 10–14 September 1990.     

Transient complex oscillations in a closed chemical system with coupled autocatalysis

In this study, hydroquinone was introduced to the classic Belousov-Zhabotinsky (BZ) reaction to build up coupled autocatalytic feedbacks. Various complex dynamical behaviors including successive period-adding bifurcations, irregular oscillations, and frequency modulations were observed in the coupled reaction system. Not only the complexity of oscillations but also the time period during which complex oscillations persist were found to depend greatly on the initial concentration of hydroquinone, which was expected to manifest the coupling strength in the studied system. Dependence of the observed transient complex oscillations on concentrations of ferroin, sulfuric acid, bromate, and malonic acid was also characterized systematically. Numerical simulations with a modified BZ model via incorporating reactions involving hydroquinone and products of hydroquinone qualitatively reproduced the influence of hydroquinone seen in experiments.     

Application of a cellulose phosphate ion exchange membrane as a binding phase in the diffusive gradients in thin films technique for measurement of trace metals

The technique of diffusive gradients in thin films (DGT) is a newly developed analytical technique capable of measuring in situ concentrations of trace metals in the environment. The technique employs a thin film diffusive hydrogel (with well-defined diffusion properties) in contact with a binding phase capable of binding metal ions of interest. In this work, we demonstrate, for the first time, the use of a commercially available solid ion exchange membrane (Whatman P81) as the binding phase in DGT analysis. The cellulose phosphate-based Whatman P81 membrane is a strong cation exchange membrane. Its performance characteristics as a new binding phase in DGT measurement of Cu²⁺ and Cd²⁺ were systematically investigated. Several advantages over the conventional ion exchange resin-embedded hydrogel binding phases used in DGT were observed including simple preparation, ease of handling, and reusability. The binding capacities of the material to various metal ions were examined both collectively and individually. The binding phase preferentially binds to transition metal ions rather than matrix ions such as potassium, sodium, calcium and magnesium, which are competitive species in natural waters. Within the optimum pH range (pH 4.0-9.0), the maximum non-competitive binding capacities of the membrane for Cu²⁺ and Cd²⁺ were 3.22 and 3.07 μmol cm⁻², respectively. The suitability of the new membrane-based binding phase for DGT applications was validated experimentally. The experimental results demonstrated excellent agreement with theoretically predicted trends. The measurement was not degraded after four consecutive reuses of the cellulose phosphate binding phase.     

Hybridized local and charge-transfer excited state fluorophores enabling organic light-emitting diodes with record high efficiencies close to 20%

Pure organic emitters with full utilization of triplet excitons are in high demand for organic light-emitting diodes (OLEDs). Herein, through modulation of electron donors and introduction of phenyl rings as π spacers, we present three pure organic fluorophores (BCz, BTCz and BPTCz) with the hybridized local and charge-transfer (HLCT) excited state feature for OLED fabrication. Importantly, the introduction of π spacers in BPTCz not only enhances locally excited character with a fast radiative decay but also promotes intermolecular interactions to suppress non-radiative decays, contributing to a high solid-state fluorescence efficiency over 90%. Significantly, BPTCz not only endows its doped OLEDs with an external quantum efficiency (EQE) up to 19.5%, but also its non-doped OLED with a high EQE of 17.8%, and these outstanding efficiencies are the state-of-the-art performances of HLCT-based OLEDs.

Three purely organic fluorophores with a hybridized local and charge-transfer excited state feature are presented and enabled organic light-emitting diodes with record high external quantum efficiencies close to 20%.     

希土与三甘醇—二(2, 2''—乙酰丙酮—4, 4''—甲基)苯基醚配合物的研究

以合成的一种新化合物三甘醇－二（２，２＇－乙酰丙酮－４，４＇－甲基）苯基醚作配体，在无水甲醇中合成了七种希土氯化物的配合物，确定其组成是ＬｎＬＣｌ（Ｌｎ：Ｌａ，Ｃｅ，Ｎｄ，Ｓｍ，Ｅｕ，Ｇｄ和Ｄｙ），Ｌ：三甘醇－二（２，２＇－乙酰丙酮－４，４＇－甲基）苯基醚。由ＩＲ，ＵＶ，ＴＧ－ＤＴＧ和display status     

Transfer of amido groups from isolated rhodium(I) amides to alkenes and vinylarenes

The reaction of monomeric and dimeric rhodium(I) amido complexes with unactivated olefins to generate imines is reported. Transamination of {(PEt(3))(2)RhN(SiMePh(2))(2)} (1a) or its -N(SiMe(3))(2) analogue 1b with p-toluidine gave the dimeric [(PEt(3))(2)Rh(mu-NHAr)](2) (Ar = p-tolyl) (2a) in 80% isolated yield. Reaction of 2a with PEt(3) generated the monomeric (PEt(3))(3)Rh(NHAr) (Ar = p-tolyl) (3a). PEt(3)-ligated arylamides 2a and 3a reacted with styrene to transfer the amido group to the olefin and to form the ketimine Ph(Me)C=N(p-tol) (4a) in 48-95% yields. The dinuclear amido hydride (PEt(3))(4)Rh(2)(mu-NHAr)(mu-H) (Ar = p-tolyl) (5a) was formed from reaction of 2a in 95% yield, and a mixture of this dimeric species and the (PEt(3))(n)RhH complexes with n = 3 and 4 was formed from reaction of 3a in a combined 75% yield. Propene reacted with 2a to give Me(2)C=N(p-tol) (4b) and 5a in 90 and 57% yields. Propene also reacted with 3a to give 4b and 5a in 65 and 94% yields. Analogues of 2a and 3a with varied electronic properties also reacted with styrene to form the corresponding imines, and moderately faster rates were observed for reactions of electron-rich arylamides. Kinetic studies of the reaction of 3a with styrene were most consistent with formation of the imine by migratory insertion of olefin into the rhodium-amide bond to generate an aminoalkyl intermediate that undergoes beta-hydrogen elimination to generate a rhodium hydride and an enamine that tautomerizes to the imine.     

Separation of Fenoxaprop-p-ethyl Biodegradation Products by HPTLC

JPC – Journal of Planar Chromatography – Modern TLC -     

Activity difference between alpha-COOH and beta-COOH in N-phosphorylaspartic acids

N-phosphorylamino acids are chemically active species that have many biomimic activities. alpha-COOH in amino acids and peptides behaviors rather differently than beta-COOH in many biochemical processes and takes a more important role in the origin of life. Activity differences between alpha-COOH and beta-COOH in the peptide formation of phosphoryl amino acids are studied by 1D, 2D NMR techniques and by ab initio and density functional theory (DFT) calculations in this paper. Phosphoryl dipeptide is formed directly from phosphoryl aspartic acids without any coupling reagents. Only the alpha-dipeptide ester is observed by 1D (1)H, (13)C, and (31)P NMR and 2D NMR. In the ab initio and DFT calculations, the pentacoordinate phosphorane intermediates containing five-membered rings are predicted to be more favored than those with six-membered rings. Both the experimental results and the theoretical calculations suggest that only the alpha-COOH group is activated by N-phosphorylation in N-phosphorylaspartic acid under mild conditions.